Welcome to the aboveground storage tank forum, a bulletin board dedicated
to tanks, fuel tanks, plastic tanks, fuel storage tanks, and above ground storage
tanks (AST) API650, API653 & UL142
aboveground storage tanks (AST) and chemical plastic tanks. Remember the forum
is made up of volunteers from experts to beginners. Unfortunately, we cannot allow free commercialism that promotes products, services, or sites.
Sponsored
by:
VAP-O-LOC GRE INTERNAL FLOATING ROOF / COVER
Stop Evaporation and Pollution
Excellent for tanks storing motor gas, ethanol, bio-diesels, bio-fuels, acids chemicals and many others to prevent losses and pollution
Built from Glass Reinforced Epoxy (GRE) an Advance Composite Material
Pre-fab, Honeycomb Sandwich Construction
Quick-to-install
Strong Unsinkable
Zero Maintenance
Will not rust, rot or corrode
Capture in excess of 98% vapor loss
Compliant with API 650, ASME RTP-1, BS4994-1987 & ASTM E-84
A Product by Dynaglass since 1971
Mesa Rubber manufactures products for aboveground storage tanks, including
Flexible Pipe
Floating Roof Drains
Skimmer Systems
Seal Systems
Gauge Pole Covers
Leg Boots
Vapor Recovery Bladders
Collapsible Storage Tanks and
Foam Delivery Systems
ATEC STEEL is an industry leader in the design, fabrication and construction of Field Erected Storage Tanks, Shop Built Tanks, Specialty Steel Fabrication and ASME Pressure Vessels. We are compliant with API 620, API 650, API 653, ASME, AWWA D100 and other recognized national and international codes. We satisfy all of the stringent requirements that allow us to maintain our ASME S, U, and NBIC R code stamp certifications.
At ATEC Steel, our quality assurance and quality control programs are unmatched in the industry. Our steel procurement is directly from the mill, which allows us to offer our clients the most competitive pricing available in today's market. Our pricing advantage, high quality fabrication and safety in the shop and field have made us the -Engineers 1st Choice in Storage-. Check us out on your next project. You will find our attitude, technology, experience and capabilities make us the -BEST CHOICE- for your project!
In Knockdown Steel Fabrication and Field Construction Services, we are the market leaders in North America!
ETANK2000: The #1 CAE tool for aboveground storage tank design / re-rating / inspection evaluation to API-650, API-620, API-653, & UL-142
API-650, Incl. Appendix A, E, F, J, M, R, S, SC, V, X
API-620 Incl. Appendix L
API-653 Incl. Appendix B (Shell Settlement)
UL-142 Steel Aboveground Tanks for Flammable-Combustible Liquids
API-2000 (Requirements for Thermal Venting)
AMETank (comming soon): All of the ETANK2000 engineering / code calculations plus Bill of Materials, Fabrication Drawings, and (soon) Estimating.
E-WARE, INC.
4611 Broad River Road, Suite I
Columbia, SC 29210
Jeffcoat Smitt
jeffcoat@etank.com
www.etank.com
Ph: 803.750.9055
Ph2: 937.203.Tank
Fax: 888.680.1861
Aluminum Domes - Only the EXPERTS in STORAGE CONTAINMENT, Tank Connection Affiliate Group, could bring you aluminum dome construction that is designed, manufactured and constructed better than competitor products.
At AluminumDomes.com, we offer precision quality, premier design, innovation in application and unmatched field installation services.
Constructed entirely of aluminum utilizing our proprietary component fabrication, our domes are corrosion resistant, maintenance free and are designed for extended service life.
Landmark Tank Services (LTS) provides over 25 years of engineering, fabrication and specialty contracting expertise, with hundreds of design / build projects delivered for clients in the industrial, military and municipal markets.
Landmark can apply proven solutions for your projects based on a broad knowledge of applicable API, ASME AWWA, NFPA, NSF, UFC, SSPC and NACE codes and regulations.
Landmark tanks are fabricated and erected worldwide.
Landmark self performs a majority of our fabrication, construction and repair process including:
- Engineering
- Steel Fabrication
- Steel Erection
- Piping Systems
- Coatings (SSPC QP-1 & QS-1 Certified)
- Civil, Foundation and Concrete Work
Landmarks comprehensive technical standards and quality assurance
procedures allow us to deliver consistent, high quality results for all of our
projects in a timely manner.
Contact Us Today for Your Next Project:
Landmark Tank Services
1665 Harmon Road
Fort Worth, Texas 76177
www.teamlandmark.com
www.LandmarkSteelFabrication.com
Ph: (817) 230-8857
Maximum & Minimum Diameter For Truss Type Roof Structure Arrangement
From: Zeon [634] Date: Tuesday, December 27, 2011 Time: 12:31:43 AM Remote Name: 212.11.164.163
Comments
Dear Experts,
I want to know from Technical,Economic & Fabrication point of view what should be the minimum & maximum Diameter for truss type roof structure arrangement may be based on experienced or by any technical reference to support this.Please tell separtely for Cone & Dome Type roof .
Thanks in advance for this as well as for your valuable suggestion till so far.
With Best Regards Zeon
Silver Star Sponsors
AIS Metallurgical Testing and Laboratory from failure analysis to impact testing.
Pressure Vessel Safety Awareness Training Tutorial is sponsored by Industrial Training School and AIS Forensic Testing Laboratory.
For training on Pressure Vessel Safety and simular subjects email us at admin@industrial-training.org or visit us at www.industrial-training.org
AIS Forensic Engineering: Failure Analysis and accident investigations from mechanical related failures to explosions with expertise in accident investigations on:
Explosions and fireballs
TCS or SiHCl3
Steam Explosions and Steam Condensate Water Hammer
Shafting
Springs
Piping
Boilers
Objective engineering in your world. Call us today at (800) 249-0959.
XCALIBUR calculation files (using MathCad format)are ready to go for you to perform your design calcs! Just like using a white board. Awesome! XCALIBUR has a warehouse of ready to go calculations in MathCad format on:
STEEL CALCS
CONCRETE and FOUNDATION CALCS
TANKS AND VESSELS
LOADINGS
Math is Power! Get paid for your Excel spreadsheets or MathCad files now. Email us at info@mathcadcalcs.com to learn how!
Steel Making Training Tutorial is sponsored by Industrial Training School and AIS Forensic Testing Laboratory.
For training correspondence courses on steel and simular subjects email us at admin@industrial-training.org or visit us at www.industrial-training.org
ETANK2000: The #1 CAE tool for aboveground storage tank design / re-rating / inspection evaluation to API-650, API-620, API-653, & UL-142
AMETank (comming soon): All of the ETANK2000 engineering / code calculations plus Bill of Materials, Fabrication Drawings, and (soon) Estimating.
4611 Broad River Road, Suite I
Forum 
Industrial Training School and AIS Forensic Testing Laboratory.
