Re: roof testing

Earl and the Aboveground Storage Tank Forum for fuel tanks, plastic tanks, fuel oil storage tanks

Welcome to the aboveground storage tank forum, a bulletin board dedicated to tanks, fuel tanks, plastic tanks, fuel storage tanks, and above ground storage tanks (AST) API650, API653 & UL142 aboveground storage tanks (AST) and chemical plastic tanks. Remember the forum is made up of volunteers from experts to beginners. Unfortunately, we cannot allow free commercialism that promotes products, services, or sites. Our main source of funding is through advertisers and donors. Please contact us about our advertising rates at info@ast-forum.com.

Other Links

The AST [Aboveground Storage Tank] Forum is being sponsored by the following company:

VAP-O-LOC
Stop Evaporation & Air Pollution

Vap-O-Loc Internal Floating Roof

1) Excellent for tanks storing ethanols, biodiesels, biofuels, acids and chemicals
2) Built from Advance Composite Material
3) Pre-fab Honeycomb Sandwich Construction
4) Quick-to-install
5) Strong Unsinkable Deck
6) Zero Maintenance
7) No Rust
8) Capture in excess 98% Vapour Loss
9) Does not rot nor corrode

A Product by Dynaglass Since 1971

Mesa Rubber manufactures products for aboveground storage tanks, including Flexible Pipe, Floating Roof Drains, Skimmer Systems, Seal Systems, Gauge Pole Covers, Leg Boots, Vapor Recovery Bladders, Collapsible Storage Tanks and Foam Delivery Systems. http://www.mesarubber.com/

ETank 2000, by Eware Inc, is an aboveground storage tank CAE tool for the design / re-rating of welded carbon steel, stainless steel, and aluminum storage tanks using API-620, API-650, API-653, ASME B96.1, and UL-142. FREE DOWNLOAD!

ATEC STEEL is an industry leader in the design, fabrication and construction of Field Erected Storage Tanks, Shop Built Tanks, Specialty Steel Fabrication and ASME Pressure Vessels. We are compliant with API 620, API 650, API 653, ASME, AWWA D100 and other recognized national and international codes. We satisfy all of the stringent requirements that allow us to maintain our ASME "S", "U", "PP" and NBIC "R" code stamp certifications. At ATEC Steel, our quality assurance and quality control programs are unmatched in the industry. Our steel procurement is directly from the mill, which allows us to offer our clients the most competitive pricing available in today's market. Our pricing advantage, high quality fabrication and safety in the shop and field have made us the "Engineers 1st Choice in Storage". Check us out on your next project. You will find our attitude, technology, experience and capabilities make us the "BEST CHOICE" for your project! In Knockdown Steel Fabrication and Field Construction Services, we are the market leaders in North America!

If you wish to promote your company or product contact us about our advertising rates at info@ast-forum.com

Re: roof testing

From: JDM [672] 1 Stars

Date: Tuesday, January 26, 2010
Time: 2:22:55 AM
Remote Name: 158.35.225.230

Comments

If you know you are going to blast the floater you should at least blast the seams first then test the welds before continuing the blasting.

Since you have already vacuum tested once. I would at least diesel test the roof before putting the tank back in service and before painting.

If you have already repainted the roof then you are stuck with visual testing and possible hydro testing at least high enough to refloat the roof.

Silver Star Sponsors

Aluminum Domes - <strong>Only the EXPERTS in STORAGE CONTAINMENT, Tank Connection Affiliate Group, could bring you aluminum dome construction that is designed, manufactured and constructed better than competitor products.</strong> At AluminumDomes.com, we offer precision quality, premier design, innovation in application and unmatched field installation services. Constructed entirely of aluminum utilizing our proprietary component fabrication, our domes are corrosion resistant, maintenance free and are designed for extended service life.

Want to Advertise on the AST Forum
Confidentiality, Disclaimer & Policy